Home improvement projects often call for risky practices. We always preach safety first, but we don’t always practice what we preach. Home Tips recently wrote an article passing along some tips for those of you tackling home improvement projects this Spring.
Accidents can happen. You need to be especially careful when you are working at heights; with power tools or sharp blades; with heavy, awkward, or toxic materials; or with electricity and natural gas. It isn’t worth it to do your own home improvements if you run a high risk of injuring yourself.
1. Tackle only those tasks that you feel safe handling.
2. Keep a tidy work area. Keeping a tidy work area helps you to avoid creating your own hazards. Don’t allow power cords to tangle. Pick up and properly store power tools, sharp tools. or dangerous materials that might cause injury. Pull all nails from old lumber.
3. Keep tools and supplies away from the reach of small children.
4. Dress for safety. Don’t work in flip-flops and shorts. Sturdy clothing, work boots, and gloves will protect you. Wear safety glasses when you use power tools, hammers, or other striking or cutting tools. If you are going to be working beneath construction, get a hard hat.
5. When using a ladder, position it on a flat, firm surface. As you climb or reach, keep your weight centered. Do not lean on one side, keep your hips between the rails and never stand on the top two rungs. When using the extension ladder to reach the roof, extend at least two rungs about the eaves this way you can hold on to the ladder as you step onto the roof.
6. Don’t go up on the roof in bad weather.
7. Equip your garage or workshop and your home with fire extinguishers. Every home should have two working fire extinguishers. Be sure they are large enough to handle home fires; they need to be rated a minimum size of “2A10BC” on the label. Periodically check them to make sure they are fully charged.
8. Protect yourself against exposure to hazardous chemicals and materials. Many varnishes, solvents, preservatives, adhesives, and other products used to accomplish projects contain hazardous ingredients. Pay attention to all label warnings, including instructions about proper ventilation.
9. Dust and fibers can be hazardous to breathe. When sanding wood, wear a dust mask. Never sand, scrape, or dislodge surfaces that you suspect contain asbestos; doing so can put highly hazardous fibers into the air.
10. Always keep a good first-aid kit on hand.
For more information and safety tips read the original article here.